NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 58
Display the nonstop forwarding checkpoint
statistics
The checkpoint statistics are the statistics for the automated messages that are sent
between the management switch and the standby management switch.
To display the nonstop forwarding checkpoint statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Stacking > Basic > Checkpoint Statistics.
The Checkpoint Statistics page displays.
6. To refresh the page, click the Refresh button.
7. To clear the statistics, click the Clear button.
8. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Description
Field
The number of messages that were sent from the stack management switch to the
standby management switch
Messages Checkpoint
The amount of data in Bytes that was sent from the stack management switch to the
standby management switch
Bytes Checkpointed
The period since the counters were reset
Time Since Counters
Cleared
The number of seconds or fractions of seconds between measurements
Checkpoint Message
Rate
Main User Manual
58
Manage Stacking
Fully Managed Switches M4350 Series Main User Manual