NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 89)

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Management > Management Interfaces > IPv6 Management
Interface Configuration.
The IPv6 Management Interface Configuration page displays.
6. From the Interface menu, select the interface that must become the IPv6
management interface.
7. Select the Set Management Interface option check box so that you can configure
the interface settings.
8. Select the Routing Mode Enable or Disable radio button to enable or disable routing
on the IPv6 management interface.
9. Select the IPv6 Enable Mode Enable or Disable radio button to enable or disable
IPv6 on the IPv6 management interface.
10. Select the Stateless Address Autoconfigure Mode Enable or Disable radio button
to enable or disable the stateless address autoconfiguration mode on the IPv6
management interface.
You can enable this mode only if unicast routing is globally disabled.
11. Select the DHCPv6 Client Mode Enable or Disable radio button to enable or disable
the DHCPv6 client mode on the IPv6 management interface.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
NOTE: If you need to reset the IPv6 management interface, in the Reset IPv6
Management Interface section of the page, select the Set Management
Interface to Default check box and click the Apply button. Doing so deletes
the IPv6 management interface configuration.
The Current IPv6 Management Interface Status section displays the following view-only
fields.
Main User Manual 89 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual