NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 33)

Using the menu in the Device View, you can navigate to a page and configure the
port settings.
8. To display the menus that let you configure global switch settings, point to the switch
anywhere other than to a port, and right-click.
Using the menu in the Device View, you can navigate to a page and configure the
switch settings.
Set up SNMPv3 access
The switch supports the configuration of SNMP groups and users that can manage traps
that the SNMP agent generates.
The switch uses both standard public MIBs for standard functionality and private MIBs
that support additional switch functionality. All private MIBs begin with a “-” prefix. The
main object for interface configuration is in -SWITCHING-MIB, which is a private MIB.
Some interface configurations also involve objects in the public MIB, IF-MIB.
SNMP is enabled by default. The System Information page, which is the page that
displays when you log in, displays the information that you need to configure an SNMP
manager to access the switch.
You cannot access the switch using SNMPv3 until you log in to the switch as an admin
and change the default password (see Log in to the main UI with a web browser on
page 27). After you do, SNMPv3 is automatically configured with the SHA512
authentication protocol and the new password for admin user.
For SNMPv3 switch access, the authentication protocol must be SHA512.
For more information about SNMP, see Simple Network Management Protocol on page
187.
To configure authentication and encryption settings for the SNMPv3 admin profile:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
Main User Manual 33 Get Started with the Main UI
Fully Managed Switches M4350 Series Main User Manual