beautypg.com

Add an oui for the auto-camera vlan, Remove an oui for the auto-camera vlan – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 268

background image

Add an OUI for the Auto-Camera VLAN

The OUI is an unique identifier for a device manufacturer or vendor. The OUI is specified
in three octet values with colons, and each octet is represented by two hexadecimal
digits.

You can add a new OUI and description to identify a camera on the network. The switch
supports a total of 256 OUIs for Auto-Camera and Auto-WiFi VLANs combined.

To add an OUI for the Auto-Camera VLAN:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Switching > Auto-VLAN > Auto-Camera > OUI Table.

The Auto-Camera OUI Table page displays.

6. In the Camera OUI field, type the OUI.

The OUI must be in the format AA:BB:CC.

7. In the Description field, type a description of up to 32 characters.

8. Click the Add button.

Your settings are saved and the OUI is added.

Remove an OUI for the Auto-Camera VLAN

You can remove a OUI that you do no longer need for the Auto-Camera VLAN.

To remove an OUI for the Auto-Camera VLAN:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

Main User Manual

268

Configure Switching Information

Fully Managed Switches M4350 Series Main User Manual