NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 80)

7. Select the Set Management Interface option check box so that you can configure
the interface IP address settings
8. Select a Configuration Method radio button:
• DHCP: The switch obtains the management interface IP address settings from a
DHCP server in the network.
• Manual: Configure the management interface IP address settings manually:
- IP Address: Specify the IP address for the management interface.
- Subnet Mask: Specify the subnet mask for the management interface.
- Gateway: Specify the IP address of the default gateway for the management
interface.
9. Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
NOTE: If you need to reset the IPv4 management interface, in the Reset IPv4
Management Interface section of the page, select the Set Management Interface
to Default check box and click the Apply button. Doing so deletes the IPv4
management interface configuration and sets the IPv4 management interface
back to the default setting.
The Current IPv4 Management Interface section displays the following view-only fields.
Table 16. IPv4 management interface status information
Description Field
Displays the current IPv4 management interface Management Interface
Indicates whether the link status is up or down Link State
Indicates whether the link status is up or down for the management
interface Routing Interface Status
The MAC address assigned to the management interface MAC Address
Indicates whether the IP address configuration method is DHCP or manual IP Address Configuration Method
The IP address of the management interface IP Address
The IP subnet mask for the management interface Subnet Mask
The specified default gateway for the management interface Gateway
Main User Manual 80 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual