Configure ntp servers – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 96
Table 19. NTP global status information (Continued)
Description
Field
The claimed stratum of the server for the last received valid packet
Server Stratum
The reference clock identifier of the server for the last received valid packet
Reference Clock ID
The mode of the server for the last received valid packet
Server mode
The maximum number of unicast server entries that can be configured on this
client
Unicast Server Max Entries
The number of current valid unicast server entries configured for this client
Unicast Server Current
Entries
The NTP Information section displays the following view-only fields.
Table 20. NTP information
Description
Field
The name of the NTP software application
NTP Software Name
The version of the NTP software application
NTP Software Version
The operating system platform information of the NTP system
NTP System Type
The NTP Packets section displays the following view-only fields.
Table 21. NTP packets information
Description
Field
The number of NTP messages that the switch received
NTP In packets
The number of NTP messages that the switch sent
NTP Out packets
The number of NTP messages for an unsupported NTP version that the switch
received
NTP old version packets
The number of NTP messages with an NTP protocol error that the switch received
NTP protocol error packets
Configure NTP servers
NTP assures accurate time synchronization for network device clock, up to the
millisecond. Time synchronization is performed by a network NTP server. The switch
operates as an NTP client only and does provide time services to other devices.
Time sources are established by stratums. Stratums define the accuracy of the reference
clock. The higher the stratum (zero is the highest), the more accurate the clock. The
Main User Manual
96
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual