NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 655)

Delete an enable authentication list
You can delete a custom login authentication list that you no longer need. You cannot
delete the enableList and enableNetList.
To delete an enable authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > Authentication List > Enable
Authentication List.
The Enable Authentication List page displays.
6. Select the check box that is associated with the list.
7. Click the Delete button.
Your settings are saved. The list is removed.
Configure the Dot1x authentication list
You can configure the dot1x authentication list, which specifies the authentication
methods to validate port access for users associated with the dot1x list. Only a single
dot1x list exists. For that list, you can select a single access method only. By default,
access to ports does not require authentication, so no default access method exists.
To configure the dot1x authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
Main User Manual 655 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual