NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 440)

• None. No RIP control packets are sent.
• RIP-1: Sends RIP version 1–formatted packets through broadcast.
• RIP-1c: Send packets in RIP version 1–compatibility mode and sends RIP version
2–formatted packets through broadcast.
• RIP-2: Send RIP version 2 packets using multicast. The default is RIP-2.
9. From the Receive Version menu, select the version of RIP control packets the
interface accepts:
• RIP-1: Accept RIP version 1–formatted packets only.
• RIP-2: Accept RIP version 2–formatted packets only.
• Both: Accept packets in either RIP version 1 or RIP version 2 format. The default
is Both.
• None: No RIP control packets are accepted.
10. From the RIP Mode menu, select Enable or Disable to enable or disable the RIP
mode for the interface.
Before you enable RIP version 1 or version 1c on an interface, you must first enable
the network-directed broadcast mode (that is, the RIP mode) on the interface. The
default is Disable.
11. From the Authentication Type menu, select the type of authentication:
• None: No authentication protocols is configured. This is the default setting.
• Simple: You are prompted to enter an authentication key. This key is included
(in non-encrypted format) in the RIP header of all packets that are sent on the
network. All devices on the network must be configured with the same key.
• Encrypt: You are prompted to enter both an authentication key and an
authentication ID. Encryption uses the MD5 Message-Digest algorithm. All devices
on the network must be configured with the same key and ID.
12. If you select Simple or Encrypt from he Authentication Type menu, in the
Authentication Key field, enter the RIP authentication key for the interface.
The key can be up to 16 octets long.
13. If you select Encrypt from he Authentication Type menu, in the Authentication Key
ID field, enter the RIP authentication Key ID for the interface.
The key ID can from 0 to 255.
14. Click the Apply button.
Your settings are saved.
15. To refresh the page, click the Refresh button.
16. To save the settings to the running configuration, click the Save icon.
Main User Manual 440 Manage Routing
Fully Managed Switches M4350 Series Main User Manual