View or clear switch statistics – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 68

5. Select System > Management > System CPU Status > CPU Threshold.

The CPU Threshold page displays.

6. Configure the following CPU threshold settings:

•

Rising Threshold: Configure the rising threshold value. A notification is generated
when the total CPU utilization exceeds this threshold value over the configured
period. The range is a percentage from 1 to 100.

•

Rising Interval: Configure the rising interval value. Configure this utilization
monitoring period from 5 to 86400 seconds in multiples of 5 seconds.

•

Falling Threshold: Configure the falling threshold. A notification is triggered
when the total CPU utilization falls below this level for a configured period of
time.

The falling utilization threshold must be equal to or less than the rising threshold
value. The falling utilization threshold notification is generated only if a rising
threshold notification was generated previously. Configuring the falling utilization
threshold and period is optional. If the falling CPU utilization values are not
configured, they take the same value as the rising CPU utilization values. The
range is a percentage from 1 to 100.

•

Falling Interval: Configure the falling interval. You can configure the utilization
monitoring period from 5 seconds to 86400 seconds in multiples of 5 seconds.

•

Free Memory Threshold: Configure the CPU free memory threshold value in
KB.

7. Click the Apply button.

Your settings are saved.

8. To save the settings to the running configuration, click the Save icon.

View or clear switch statistics

To view or clear the switch statistics:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.