beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 722

background image

communicate with all types of ports in private VLANs (including promiscuous
ports, community ports, and isolated ports) and with ports in regular VLANs.

To assign a promiscuous trunk port to specific VLANs, see Private VLAN
promiscuous trunk interface: Add primary and secondary VLANs to the trunk
on
page 728.

Isolated trunk port: The port functions in isolated trunk mode (for example, it
can connect to multiple downstream devices) and can be a member of multiple
isolated VLANs (secondary VLANs within private VLANs) as well as regular VLANs.
In this mode, the port processes tagged traffic to communicate with ports in
isolated VLANs and with ports in regular VLANs. The downstream devices that
are connected to the isolated trunk port do not need to be capable of supported
private VLANs.

To assign an isolated trunk port to specific VLANs, see Private VLAN isolated
trunk interface: Add primary and secondary VLANs to the trunk
on page 731.

9. Click the Apply button.

Your settings are saved.

10. To save the settings to the running configuration, click the Save icon.

Private VLAN host interface: Assign the
interface to primary and secondary VLANs

If you configure the private VLAN port mode of an interface as Host (see Configure the
private VLAN port mode
on page 720), you can assign the interface to a single primary
VLAN and single secondary VLAN.

To assign a private VLAN host interface to a primary and secondary VLAN:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

Main User Manual

722

Manage Switch Security

Fully Managed Switches M4350 Series Main User Manual