NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 452)

The System Information page displays.
5. Select Routing > VRRP > Advanced > VRRP Secondary IP Address Configuration.
The VRRP Secondary IP Address Configuration page displays. The page shows
different sections.
6. From the VRRP Interface menu, select the VRRP interface that must function as a
secondary virtual router.
7. From the VRRP ID menu, select the VRID that is assigned to the secondary virtual
router.
8. In the Secondary IP Address field, enter the IP address for the secondary virtual
router.
This address must be part of an IP address subnet on the interface.
The Primary IP Address fields shows the IP address that is assigned to the primary
virtual router with the same VRID.
9. Click the Add button.
Your settings are saved. The secondary virtual router is added.
10. To save the settings to the running configuration, click the Save icon.
Change the IP address for a secondary
virtual router
You can change the IP address for an existing secondary virtual router.
To change the IP address for a secondary virtual router:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > VRRP > Advanced > VRRP Secondary IP Address Configuration.
Main User Manual 452 Manage Routing
Fully Managed Switches M4350 Series Main User Manual