NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 609)

• Source L4 Port: Select this radio button to require a packet’s TCP/UDP source
port to match the specified protocol, which you must select from the menu. The
range is 0 to 65535. The menu includes Other as an option for unnamed ports.
• Destination Prefix/Length: Select this radio button to require a packet’s
destination prefix and prefix length to match the specified source IPv6 prefix and
prefix length. Prefix must always be specified with the prefix length. The prefix
can be in the hexadecimal range from 0 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF and the prefix length can be in the
range from 0 to 128.
• Destination L4 Port: Select this radio button to require a packet’s TCP/UDP
destination port to match the specified protocol, which you must select from the
menu. The range is 0 to 65535. The menu includes Other as an option for
unnamed ports.
• Flow Label: Select this radio button to require a packet’s flow label to match the
specified flow label. The flow label is a 20-bit number that is unique to an IPv6
packet and that is used by end stations to signify QoS handling in routers. The
flow label can be specified in the range from 0 to 1048575.
• IP DSCP: Select this radio button to require the packet’s IP DiffServ Code Point
(DSCP) value to match the specified IP DSCP keyword code, which you must
select from the menu. The menu includes Other as a selection, which lets you
enter an IP DSCP value from 0 to 63. The DSCP value is defined as the high-order
6 bits of the Service Type octet in the IP header.
11. Click the Apply button.
Your settings are saved.
12. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only information displayed in the Class Summary
section.
Table 151. IPv6 DiffServ class configuration class summary
Description Field
The configured match criteria for the specified class. Match Criteria
The values of the configured match criteria. Values
Rename an existing IPv6 DiffServ class
You can change the name for an existing IPv6 DiffServ class.
Main User Manual 609 Configure Quality of Service
Fully Managed Switches M4350 Series Main User Manual