NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 806)

The Current Number of ACL field displays the current number of all ACLs configured
on the switch.
The Maximum ACL field displays the maximum number of ACLs that you can
configure on the switch.
6. In the IP ACL ID field, specify the ACL ID or IP ACL name, which depends on the IP
ACL type. The IP ACL ID is an integer in the following range:
• 1–99: Creates a basic IP ACL, which allows you to permit or deny traffic from a
source IP address.
• 100–199: Creates an extended IP ACL, which allows you to permit or deny specific
types of Layer 3 or Layer 4 traffic from a source IP address to a destination IP
address. This type of ACL provides more granularity and filtering capabilities
than the standard IP ACL.
• IP ACL Name: Creates an extended IP ACL with a name string that is up to
31 alphanumeric characters in length. The name must start with an alphabetic
character.
Each configured ACL displays the following information:
• Rules: The number of rules currently configured for the IPv4 ACL.
• Type: Identifies the ACL as a basic IP ACL (with ID from 1 to 99), extended IP ACL
(with ID from 100 to 199), or named ACL (which is also an extended ACL).
7. Click the Add button.
The IP ACL is added.
8. To save the settings to the running configuration, click the Save icon.
Change the number or name of an IPv4 ACL
You can change the number or name of an IPv4 ACL.
To change the number or name of an IPv4 ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
Main User Manual 806 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual