NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 947)

Table 193. Routing, OSPF, OSPFv3, and multicast features default settings (Continued)
Default Feature Name/Setting
IP, Interface
None IP address configuration method
None IP address
None Subnet mask
Disabled Routing mode
Enabled Administrative mode
Disabled Forward net directed broadcasts
Ethernet Encapsulation type
Enabled Proxy ARP
Disabled Local proxy ARP
Depends on the port capacity
(The bandwidth is automatically assigned but you
can change it.)
Bandwidth
Enabled ICMP destination unreachables
Disabled ICMP redirects
1500 IP MTU
IP, Secondary IP
None Secondary IP address
None Secondary IP subnet mask
IPv6, Global
Disabled IPv6 unicast routing
64 Hop limit
1000 ICMPv6 rate limit error interval
100 ICMPv6 rate limit burst size
IPv6, Interface
Disabled IPv6 mode
Disabled DHCPv6 Client mode
Disabled Stateless Address AutoConfig mode
Disabled Routing mode
Main User Manual 947 Software Default Settings and
Hardware Specifications
Fully Managed Switches M4350 Series Main User Manual