NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 383)

The MSRP Reservation Parameters page displays.
6. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 97. MSRP reservation parameters information
Description Field
The interface for which information is displayed. Interface
A 16-bit unsigned integer value, which is a unique ID used to distinguish the
stream among multiple streams from the same device. Stream ID
The MSRP declaration status of the listener attribute. Listener Declaration Status
The MSRP declaration type of the listener attribute. Listener Declaration Type
The MSRP declaration status of the talker attribute. Talker Declaration Status
The MSRP declaration type of the talker attribute. Talker Declaration Type
The latency, in nanoseconds, that occurred for the stream on its path from
the talker to a listener. The latency starts with zero and is increased by one
for each device that the stream propagates through in the network. Accumulated Latency
If a failure occurred, the interface on the device on which the failure occurred. Failure Bridge Interface
If a failure occurred, the MAC address of the device on which the failure
occurred. Failure Bridge MAC
If a failure occurred, the number that represents the reason for the failure.
The switch supports the following codes:
• 1: Insufficient bandwidth
• 3: Insufficient bandwidth for the traffic class
• 5: Stream destination address is already in use
• 7: Reported latency changed
• 8: Egress port is not capable of audio video bridging (AVB)
• 9: Use a different destination address (for example, if the MAC DA hash
table is full)
• 12: Cannot store destination address (for example, if the device ran out of
MAC DA resources)
• 13: Requested priority is not an SR class priority
• 14: MaxFrameSize is too large for media
• 15: msrpMaxFanInPorts limit was reached
• 16: Changes in FirstValue for a registered StreamID
• 17: VLAN is blocked on this egress port (Registration Forbidden)
Failure Code
The time, in seconds, since the stream destination address was added to the
Dynamic Reservations Entries table. A value of zero indicates the destination
address was not added to the table. Stream Age
Main User Manual 383 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual