NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 182

The fields in the Timer Schedule Configuration section might adjust to let you
configure a timer schedule for specific dates and times.

c. Timer Schedule Entry. To add a new entry, select new.

Selecting an existing entry lets you make changes to that entry.

7. In the Timer Schedule Configuration section, specify the times and dates:

a. In the Time Start field, enter the time of day in the HH:MM format to specify when

the timer schedule must start.

b. In the Time End field, enter the time of day in the HH:MM format to specify when

the timer schedule must stop.

c. Next to the Date Start field, click the calendar icon and use the menus in the

pop-up window to enter the date in the DD-Mon-YYY format to specify when the
timer schedule must start.

d. Next to the Date End field, click the calendar icon and use the menus in the

pop-up window to enter the date in the DD-Mon-YYY format to specify when the
timer schedule must stop.

8. Click the Add button.

The entry for the timer schedule is added.

9. To save the settings to the running configuration, click the Save icon.

Specify the settings for a recurring timer
schedule

A recurring schedule allows you to set up a single schedule that starts at a particular
date and that recurs either with a specific end date or indefinitely.

For a single recurring timer schedule, you can add a daily, weekly, and monthly schedule
configuration. That is, these schedule configurations are not mutually exclusive but
complement each other.

To specify the settings for a timer schedule that uses a recurring pattern:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.