NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 704)

Display the MAC filter summary
You can display the MAC filters that are configured on the switch.
To display the MAC filter summary:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Traffic Control > MAC Filter > MAC Filter Summary.
The MAC Filter Summary page displays.
The following table describes the view-only fields on the page.
Table 166. MAC filter summary information
Description Field
The MAC address of the filter in the format XX:XX:XX:XX:XX:XX. MAC Address
The VLAN ID used with the MAC address to fully identify packets you want
filtered. VLAN ID
The ports to be used for filtering inbound packets. Source Port Members
The ports to be used for filtering outbound packets. Destination Port Members
Port security
Port security lets you lock one or more ports on the switch. When a port is locked, the
port can only forward packets if the total number of dynamically learned MAC addresses
and the total number of statically added MAC addresses are not exceeded. You can set
the thresholds for these numbers. Once a threshold is exceeded, the port discards all
other packets.
Main User Manual 704 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual