NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 438)

• None: No special processing is enabled.
• Simple: A route is not included in updates that are sent to the device from which
it was learned. The default is Simple.
• Poison Reverse: A route is included in updates sent to the device from which it
was learned, but the metric is set to infinity.
Split horizon is a technique for preventing problems that might be caused by
including routes in updates sent to a device from which the route was originally
learned.
8. Select the Auto Summary Mode Enable or Disable radio button to enable or disable
groups of adjacent routes from being summarized in single entries.
If you select the Enable radio button, adjacent routes are summarized in single
entries to reduce the total number of entries. The default is Disable.
9. Select the Host Routes Accept Mode Enable or Disable radio button to enable or
disable the switch from accepting host routes.
If you select the Enable radio button, the switch accepts host routes. The default is
Enable.
10. Select the Default Information Originate Enable or Disable radio button to enable
or disable default route advertisements.
The default is Disable.
11. In the Default Metric field, specify a metric value for redistributed routes.
The range is from 1 to 15. The default is 0.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 114. RIP configuration information
Description Field
The number of route changes made to the IP route database by RIP. This
does not include the refreshing of a route after it aged out. Global Route Changes
The number of responses sent to RIP queries from other devices. Global Queries
Configure RIP interface settings
You can configure RIP settings that apply to individual interfaces.
Main User Manual 438 Manage Routing
Fully Managed Switches M4350 Series Main User Manual