beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 636

background image

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > Management Security > RADIUS > Global Configuration.

The Global Configuration page displays.

The Current Server IP Address field is blank if no servers are configured (see
Configure a RADIUS authentication server on the switch on page 638).

The switch supports up to three configured RADIUS servers. If more than one RADIUS
server is configured, the current server is the primary server. If no servers is configured
as the primary server, the current server is the most recently added RADIUS server.

6. From the Source Interface menu, select the source interface that the switch must

use to communicate with the RADIUS servers. By default, the following options
display in the menu:

None: The primary IP address of the originating (outbound) interface is used as
the source address.

VLAN 1: The primary IP address of VLAN 1 is used as the source address. This is
the default selection.

Service Port: The management port IP address is used as the source address.

Depending on the configuration of your switch, the following options can display:

Another VLAN ID: The primary IP address of a VLAN other than VLAN 1 is used
as the source address.

Routing interface: The primary IP address of a routing interface is used as the
source address.

Routing VLAN: The primary IP address of a VLAN routing interface is used as
the source address.

Routing loopback interface: The primary IP address of a routing loopback
interface is used as the source address.

Different: For some features,

Different

can display. This means that the source

interface is configured separately.

Main User Manual

636

Manage Switch Security

Fully Managed Switches M4350 Series Main User Manual