NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 533)

The value is from 1 to 20. The default is 2.
15. In the Last Member Query Interval field, enter the last member query interval in
tenths of a second.
This value is the maximum response time to be inserted into group-specific queries
sent in response to leave group messages, and is also the period between
group-specific query messages. The value is from 0 to 255. The default is 10. This
value is not used for IGMP version 1.
16. In the Last Member Query Count field, enter the number of queries to be sent on
receiving a leave group report.
The value is from 1 to 20. The default is 2.
17. Click the Apply button.
Your settings are saved.
18. To save the settings to the running configuration, click the Save icon.
Display the statistics for the IGMP routing
interfaces
You can display the statics for the IGMP routing interfaces.
To display the statistics for the IGMP routing interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > IGMP > Routing Interface Statistics.
The Routing Interface Statistic page displays.
6. Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
Main User Manual 533 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual