NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 311)

Table 76. IGMP snooping configuration information (Continued)
Description Field
Indicates if IGMP snooping is globally enabled or disabled on the switch. Operational Mode
The VLANs on which IGMP snooping is enabled. VLAN IDs Enabled For IGMP
Snooping
Configure the IGMP snooping settings for
interfaces
You can configure the IGMP snooping settings for interfaces.
To configure the IGMP snooping settings for interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Multicast > IGMP Snooping > Interface Configuration.
The Interface Configuration page displays.
6. Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
• 1 or Unit ID for a stacked switch:
Main User Manual 311 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual