NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 329)

To configure MLD snooping for VLANs automatically:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Multicast > MLD Snooping > MLD VLAN Configuration.
The MLD VLAN Configuration page displays.
6. Select the check box for the VLAN ID for which MLD snooping must be enabled.
7. From the MLD Plus Mode menu, select to enable or disable the MLD Plus mode on
the VLAN.
If enabled, the following MLD snooping modes are automatically enabled for the
VLAN:
• Admin mode
• Fast-Leave
• Exclude Mrouter Interface Mode
If disabled, these MLD snooping modes are automatically disabled for the VLAN.
NOTE: For information about other settings on the page, see Configure
MLD snooping for VLANs manually on page 330.
8. Click Add to enable MLD Snooping on the specified VLAN.
9. Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
Main User Manual 329 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual