Link dependency, Configure a link dependency group – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 217
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > LLDP-MED > Remote Device Inventory.
The Remote Device Inventory page displays.
6. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 54. LLDP-MED remote device inventory information
Description
Field
The interface on the switch on which LLDP-MED information is received
Port
The advertised management address of the remote device
Management Address
The MAC address of the remote device
MAC Address
The system model of the remote device
System Model
The software version that is running on the remote device
Software Revision
Link dependency
Link dependency lets you enable or disable one or more interfaces based on the link
state of one or more
other
interfaces. That is, if you enable link dependency on an
interface, the link state of that interface depends on the link state of another interface.
For example, if port 0/2 depends on port 0/4 and the switch detects a link loss on port
0/4, the switch can automatically bring down the link on port 0/2. When the link is
restored on port 0/4, the switch can automatically restore the link on port 0/2.
The other way around is also possible: If port 0/2 depends on port 0/4 and the switch
detects a link loss on port 0/4, the switch can automatically bring up the link on port
0/2. When the link is restored on port 0/4, the switch can automatically bring down the
link on port 0/2.
Configure a link dependency group
A link dependency group includes a list of upstream interfaces, a list of downstream
interfaces, and an action that is configured for the group. If all upstream interfaces in
Main User Manual
217
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual