NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 222)

NOTE: The group IDs are not associated with interface numbers.
7. Click the Clear button.
The interfaces are removed from the group.
8. To save the settings to the running configuration, click the Save icon.
Industry Standard Discovery
Protocol
Industry Standard Discovery Protocol (ISDP) is a protocol that enables devices to share
information in a network.
You can configure the global and interface settings for ISDP.
Configure the global ISDP settings
You can configure the ISDP settings that apply globally to the switch.
To configure the global ISDP settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > ISDP > Basic > Global Configuration.
The Global Configuration page displays.
Main User Manual 222 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual