NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 454)

Your settings are saved. The secondary virtual router is removed.
10. To save the settings to the running configuration, click the Save icon.
Configure VRRP interface tracking and route
tracking
You can let VRRP track specific interfaces and routes and let VRRP determine if they can
be reached. If a tracked interface or route is not reachable, VRRP can let a secondary
router take over.
To configure VRRP interface tracking and route tracking:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > VRRP > Advanced > VRRP Tracking Configuration.
The VRRP Tracking Configuration page displays. The page shows different sections.
6. From the VRRP Interface menu, select the VRRP interface that you want to track.
7. From the VRRP ID menu, select the virtual router ID (VRID) that you want to track.
8. In VRRP Tracking Interface Configuration section, configure the following settings:
• From the Tracked Interface menu, select the routing interface to be tracked.
The menu shows all routing interfaces that are not yet tracked for the selected
VRRP interface and VRRP ID combination. Loopback interfaces and tunnels that
cannot be tracked and are not shown.
• In the Priority Decrement field, enter a priority decrement value the for the
tracked interface.
If the interface cannot be reached, its VRRP priority is decreased with the value
that you enter. The range is from 1 to 254. The default is 10.
Main User Manual 454 Manage Routing
Fully Managed Switches M4350 Series Main User Manual