NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 398)

The default value is 120. The range is from 1 to 255.
8. In the OSPF Intra field, specify the OSPF intra route preference on the switch.
The default value is 110. The range is from 1 to 255.
9. In the OSPF Inter field, specify the OSPF inter route preference on the switch.
The default value is 110. The range is from 1 to 255.
10. In the OSPF External field, specify the OSPF external route preference on the switch.
The default value is 110. The range is from 1 to 255.
11. Click the Apply button.
Your settings are saved.
The Local field displays the local route preference value.
12. To save the settings to the running configuration, click the Save icon.
IPv4 routing
You can enable or disable the IPv4 routing mode, configure the global IPv4 routing
settings, configure IPv4 routing interfaces, add a secondary IP address to an IPv4 routing
interface, and view IPv4 routing statistics.
Manage the global IPv4 routing settings
You can configure the IPv4 routing settings for the switch, as opposed to the IPv4 routing
settings for an interface.
To configure the global IPv4 routing settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
Main User Manual 398 Manage Routing
Fully Managed Switches M4350 Series Main User Manual