NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 535
Display the IGMP groups and search the
IGMP group database
You can display the IGMP group information and search the IGMP group database by
interface or by group.
To display the IGMP groups and search the IGMP group database:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > IGMP > IGMP Groups.
The IGMP Groups page displays.
6. To search for IGMP group entries by interface or group, select one of the following
options from the Search menu:
•
Interface: Select Interface from the menu, specify the interface in unit/port format
(for example 0/8), and click the Go button.
If the entry exists, the entry is displayed as the first entry, followed by the remaining
entries.
•
Group: Select Group from the menu, specify the multicast group IPv4 address,
and click the Go button.
If the entry exists, that entry with the matching group IPv4 address is displayed
as the first entry, followed by the remaining entries. An exact match is required.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Main User Manual
535
Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual