NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 169)

6. If a stack is configured, select whether to display the physical interfaces for one switch
or for all switches in the stack:
• Unit ID for a stacked switch: The physical interfaces for the switch with the
selected stack unit ID are displayed.
If no switch stack is configured, the only option is unit ID 1.
• All: The physical interfaces for all switches in the stack are displayed.
If no switch stack is configured, the All option does not have any effect.
7. In the System Usage Threshold field, enter a number from 1 to 99 to set the
threshold level at which a trap is sent if the consumed power exceeds the threshold
power.
8. From the Power Management mode menu, select the power management algorithm
that the switch uses to deliver power to the requesting PDs:
• Static: Select Static to specify that the power allocated for each port depends
on the type of power threshold that is configured on the port.
• Dynamic: Select Dynamic to specify that the power consumption on each port
is measured and calculated in real time. This is the default setting.
9. To set the traps, in the PoE Trap Configuration section, select one of the following
radio buttons:
• Enable: Activates the PoE traps, which means that the switch can send PoE traps.
This is the default setting.
• Disable: Deactivates the PoE traps, which means that the switch cannot not send
PoE traps.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 43. PoE information
Description Field
The unit is always 1, unless you configured a switch stack, in which the case the
unit depends on the stacked switch. Unit
The slot is always 0. Slot
The power sourcing equipment (PSE) controller Model
The switch model in which the PSE controller is installed Host
The firmware version of the PSE controller Firmware Version
Main User Manual 169 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual