NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 709
Add a static MAC address to the MAC
address table for port security
Static MAC address entries are the ones that you manually add to the MAC address
table for port security for a specific interface and VLAN.
To add a static MAC address to the MAC address table for port security:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Traffic Control > Port Security > Static MAC Address.
The Static MAC Address page displays.
6. From the Interface menu, select the interface or LAG.
7. In the Static MAC Address field, enter the MAC address.
8. From the VLAN ID menu, select the VLAN ID that must be associated with the MAC
address.
9. Click the Add button.
The static MAC address is added to the MAC address table.
10. To save the settings to the running configuration, click the Save icon.
Remove a static MAC address from the MAC
address table for port security
You can remove a static MAC address that you no longer need for port security.
Main User Manual
709
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual