NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 710)

To remove a static MAC address from the MAC address table for port security:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Traffic Control > Port Security > Static MAC Address.
The Static MAC Address page displays.
6. From the Interface menu, select the interface or LAG.
7. Select the check box for the MAC address.
8. Click the Delete button.
The static MAC address is removed from the MAC address table.
9. To save the settings to the running configuration, click the Save icon.
Private port groups
To add a level of security, you can set up a private group of physical ports (not LAGs)
that can function in isolated or community mode:
• Isolated mode group: A port that you add as member of the group cannot forward
its egress traffic to any other members in the same group.
• Community mode group: A port that you add as member of the group can forward
its egress traffic to other members in the same group, but not to members in other
groups.
Main User Manual 710 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual