beautypg.com

Delete a static arp entry – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 433

background image

Table 112. ARP cache information

Description

Field

The IP address of the device.

IP Address

The associated interface (in the unit/port format) for the device connection.

Port

The unicast MAC address of the device.

MAC Address

The type of ARP entry. Possible values are as follows:

Local: An ARP entry associated with one of the switch’s routing

interface’s MAC addresses.

Gateway: A dynamic ARP entry for which the IP address is that of a

router.

Static: An ARP entry that you added.

Dynamic: An ARP entry that was learned by the switch.

Type

The time (in seconds) since the entry was last refreshed in the ARP table.

Age

Delete a static ARP entry

You can delete a static ARP entry that you no longer need.

To delete a static ARP entry:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Routing > ARP > Advanced > ARP Create.

The ARP Create page displays.

6. Select the check box for the entry.

7. Click the Delete button.

Main User Manual

433

Manage Routing

Fully Managed Switches M4350 Series Main User Manual