NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 723)

The System Information page displays.
5. Select Security > Traffic Control > Private VLAN > Private VLAN Host Interface
Configuration.
The Private VLAN Host Interface Configuration page displays.
6. Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
• 1 or Unit ID for a stacked switch:
- 1: If no switch stack is configured, the physical interfaces for the switch are
displayed.
- Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.
• LAG: Only LAGs are displayed.
• All: Both physical interfaces and LAGs are displayed, or for a switch stack, both
physical interfaces on all switches in the stack and LAGs are displayed.
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
8. In the Host Primary VLAN field, specify a primary VLAN ID.
You can select a VLAN for which you configured the type as Primary (see Assign a
private VLAN type to a VLAN on page 717).
9. In the Host Secondary VLAN field, specify a secondary VLAN ID.
You can select a VLAN for which you configured the type as Isolated or Community,
both of which are secondary VLAN types within a private VLAN (see Assign a private
VLAN type to a VLAN on page 717).
10. Click the Apply button.
Your settings are saved.
The Operational VLAN(s) fields shows the primary and secondary VLANs that operate
on the host interface.
11. To save the settings to the running configuration, click the Save icon.
Main User Manual 723 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual