NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 738
•
Recovery Mode: Enable of disable this option for broadcast traffic:
-
Enable: If broadcast traffic exceeds the configured threshold, the port discards
the broadcast traffic. The default is Enable.
-
Disable: If broadcast traffic exceeds the configured threshold, broadcast is
not discarded.
•
Recovery Level Type: Specify the recovery level in the Recovery Level field as
a percentage of the port link speed or as packets per second:
-
Percent: The recovery level is expressed as a percentage of link speed.
-
pps: The recovery level is expressed as a packets per second (pps).
•
Recovery Level: Specify the threshold at which broadcast storm control is
activated. By default, the recovery level is 5 percent of the port link speed of 5
pps.
•
Control Action: Specify one of the following actions:
-
None: No further action is taken. This is the default setting.
-
Trap: If broadcast traffic exceeds the configured threshold, a trap is sent.
-
Shutdown: If broadcast traffic exceeds the configured threshold, the port is
shut down.
9. Configure the following settings for multicast storms:
•
Recovery Mode: Enable of disable this option for multicast traffic:
-
Enable: If multicast traffic exceeds the configured threshold, the port discards
the multicast traffic. The default is Enable.
-
Disable: If multicast traffic exceeds the configured threshold, multicast is not
discarded.
•
Recovery Level Type: Specify the recovery level in the Recovery Level field as
a percentage of the port link speed or as packets per second:
-
Percent: The recovery level is expressed as a percentage of link speed.
-
pps: The recovery level is expressed as a packets per second (pps).
•
Recovery Level: Specify the threshold at which multicast storm control is
activated. By default, the recovery level is 5 percent of the port link speed of 5
pps.
•
Control Action: Specify one of the following actions:
-
None: No further action is taken. This is the default setting.
-
Trap: If multicast traffic exceeds the configured threshold, a trap is sent.
-
Shutdown: If multicast traffic exceeds the configured threshold, the port is
shut down.
10. Configure the following settings for unicast storms:
Main User Manual
738
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual