NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 407)

• 1 or Unit ID for a stacked switch:
- 1: If no switch stack is configured, the physical interfaces for the switch are
displayed.
- Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.
• VLANS: Only VLANs are displayed.
• All: Both physical interfaces and VLANs are displayed, or for a switch stack, both
physical interfaces on all switches and VLANs are displayed.
7. Select one or more interfaces by taking one of the following actions:
• To delete the IP address for a single interface, select the check box associated
with the interface, or type the interface number in the Go To Interface field and
click the Go button.
• To delete the IP address for multiple interfaces, select the check box associated
with each interface.
8. Click the Delete button.
Your settings are saved. The IP routing address is removed from the IPv4 routing
interface.
9. To save the settings to the running configuration, click the Save icon.
Configure a secondary IP address for an IPv4
routing interface
You can configure a secondary IP address for an IPv4 routing interface.
To configure the secondary IP address:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
Main User Manual 407 Manage Routing
Fully Managed Switches M4350 Series Main User Manual