NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 201)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > Global Configuration.
The Global Configuration page displays.
6. In the TLV Advertised Interval field, enter the interval in seconds to transmit LLDP
frames.
The range is from 5 to 32768 secs. The default is 30 seconds.
7. In the Hold Multiplier field, enter the multiplier for the value that you enter in the
TLV Advertised Interval field, which determines the time-to-live (TTL) for LLDP
notifications.
The range is from 2 to 10 secs. The default value is 4. As an example, if the value
that you enter in the TLV Advertised Interval field is 30 and the value that you enter
in the Hold Multiplier field is 4, the TTL for LLDP notifications is 120 seconds.
8. In the Reinitialization Delay field, enter the delay before reinitialization starts.
The range is from 1 to 10 secs. The default is 2 seconds.
9. In the Notification Interval field, enter the interval in seconds for the transmission
of notifications.
The range is from 5 to 3600 secs. The default is 5 seconds.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
Configure LLDP interface settings
You can specify LLDP settings that are applied to one or more interfaces.
To configure LLDP interface settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
Main User Manual 201 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual