NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 455)

The Tracked Interface State field displays is the interface can be reached.
9. In VRRP Tracking Route Configuration section, configure the following settings:
• In the Tracked Route Prefix field, enter the prefix of the route to be tracked.
• In the Tracked Route Prefix Length field, enter the prefix length of the route to
be tracked.
• In the Priority Decrement field, enter a priority decrement value the for the
tracked route.
If the route cannot be reached, its VRRP priority is decreased with the value that
you enter.
The range is from 1 to 254. The default is 10.
The Reachable field displays if the tracked route can be reached.
10. Click the Add button.
Your settings are saved. The tracking configuration is added.
11. To save the settings to the running configuration, click the Save icon.
View VRRP statistics
If VRRP is enabled, you can view global VRRP statics and statics for each VRRP ID.
To view VRRP statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Advanced > VRRP Statistics.
The VRRP Statistics page displays. The page shows different sections.
6. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Main User Manual 455 Manage Routing
Fully Managed Switches M4350 Series Main User Manual