NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 803)

Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 176. Interface Binding Status information
Description Field
The selected interface. Interface
The selected packet filtering direction for the ACL. Direction
The type of ACL assigned to the selected interface and direction. ACL Type
The ACL number or name identifying the ACL assigned to the selected interface and
direction. ACL ID
The sequence number signifying the order of specified ACL relative to other ACLs
assigned to the selected interface and direction. Sequence Number
Display or delete MAC ACL bindings in the
MAC binding table
You can display or delete the MAC ACL bindings in the MAC binding table.
To display or delete MAC ACL bindings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Basic > Binding Table.
The Binding Table page displays. This table displays the MAC ACL-to-interface
bindings.
6. To delete a MAC ACL-to-interface binding, do the following:
Main User Manual 803 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual