NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 487)

• Always: OSPF performs a graceful restart for all planned and unplanned warm
restart events.
• Disabled: OSPF graceful restarts are disabled. This is the default selection.
• Planned: OSPF performs a graceful restart only if a restart is planned (for example,
because a CLI command is executed).
7. In the Restart Interval field, enter the time that the switch waits after a graceful
restart before continuing OSPF routing.
The range is from 0 to 1800 seconds. The default is 120 seconds.
8. From the Helper Support Mode menu, select if the switch can support a neighbor
that performs a warm restart:
• Always: OSPF helps a restarting neighbor for all planned and unplanned warm
restart events. This is the default selection.
• Disabled: OSPF does not help a restarting neighbor.
• Planned: OSPF helps a restarting neighbor only if the restart is planned.
9. From the Helper Strict LSA Checking menu, select if the switch exits helper support
mode when the topology changes:
• Enable: The switch exits helper support mode when the topology changes. This
is the default selection.
• Disable: The switch does not exit helper support mode when the topology
changes.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Main User Manual 487 Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual