NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 403)

Table 103. IP statistics information (Continued)
Description Field
The number of ICMP destination unreachable messages sent. IcmpOutDestUnreachs
The number of ICMP time exceeded messages sent. IcmpOutTimeExcds
The number of ICMP parameter problem messages sent. IcmpOutParmProbs
The number of ICMP source quench messages sent. IcmpOutSrcQuenchs
The number of ICMP redirect messages sent. For a host, this is always
zero, since hosts do not send redirects. IcmpOutRedirects
The number of ICMP echo (request) messages sent. IcmpOutEchos
The number of ICMP echo reply messages sent. IcmpOutEchoReps
The number of ICMP timestamp (request) messages. IcmpOutTimestamps
The number of ICMP timestamp reply messages sent. IcmpOutTimestampReps
The number of ICMP address mask request messages sent. IcmpOutAddrMasks
Configure IPv4 routing interfaces
You can configure one or more IPv4 routing interfaces.
To configure one or more IPv4 routing interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IP > Advanced > IP Interface Configuration.
The IP Interface Configuration page displays.
Main User Manual 403 Manage Routing
Fully Managed Switches M4350 Series Main User Manual