Display or clear eap and eapol statistics – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 844
Table 182. Port detailed statistics information (Continued)
Description
Field
The number of valid EAPOL frames of any type that were received by this
authenticator.
EAPOL Frames Received
The number of EAPOL frames of any type that were transmitted by this
authenticator.
EAPOL Frames Transmitted
The period in seconds for which data is used to compute load statistics.
Load Interval
The received data rate in Mbps.
Received Rate (Mbps)
The transmitted data rate in Mbps.
Transmitted Rate (Mbps)
The received data rate with errors in Mbps.
Received Error Rate
The transmitted data rate with errors in Mbps.
Transmitted Error Rate
The number of received packets per second.
Packets Received Per
Second
The number of transmitted packets per second.
Packets Transmitted Per
Second
The utilization for received traffic, rounded to the nearest whole percentage.
Percent Utilization Received
The utilization for transmitted traffic, rounded to the nearest whole percentage.
Percent Utilization
Transmitted
The elapsed time in days, hours, minutes, and seconds since the statistics for
this port were last cleared.
Time Since Counters Last
Cleared
Display or clear EAP and EAPoL statistics
You can display information about Extensible Authentication Protocol (EAP) and EAP
over LAN (EAPoL) packets that are received on physical ports.
To display or clear EAP and EAPoL statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
Main User Manual
844
Monitor the Switch and Network
Fully Managed Switches M4350 Series Main User Manual