Configure rules for an ipv6 acl, Add a rule for an ipv6 acl – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 823
The IPv6 ACL is removed.
8. To save the settings to the running configuration, click the Save icon.
Configure rules for an IPv6 ACL
You can define rules for IPv6 ACLs. The access list definition includes rules that specify
whether traffic matching the criteria is forwarded normally or discarded.
Add a rule for an IPv6 ACL
You can add a rule for an IPv6 ACL.
To add a rule for an IPv6 ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Advanced > IPv6 Rules.
If no rules exists, the IPv6 ACL Rule Table shows the message
No rules have been
configured for this ACL
. If one or more rule exists for the ACL, the rules display in
the IPv6 ACL Rule Table.
6. From the ACL Name menu, select the IPv6 ACL for which you want to add or a
change a rule.
7. Click the Add button.
Main User Manual
823
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual