Udp relay – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 146
Table 37. DHCP L2 relay interface statistics information (Continued)
Description
Field
The number of DHCP messages with Option 82 received from an untrusted
client
UntrustedClientMsgsWithOpt82
The number of DHCP messages without Option 82 received from a trusted
server
TrustedServerMsgsWithoutOpt82
The number of DHCP messages without Option 82 received from a trusted
client
TrustedClientMsgsWithoutOpt82
UDP relay
You can enable the switch to function as a UDP relay, which enables the switch to forward
User Datagram Protocol (UDP) broadcast packets from a router to an IP address on a
local or non-local subnet.
Configure the global UDP relay settings and
add a UDP relay
To configure the global UDP relay settings and add a UDP relay:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Services > UDP Relay > UDP Relay Global Configuration.
The UDP Relay Global Configuration page displays.
Main User Manual
146
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual