Display the mvr statistics – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 344
A selected port is shown by a check mark.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Display the MVR statistics
You can display MVR statistics for the switch. These statistics are associated with IGMP.
To display the MVR statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > MVR > Advanced > MVR Statistics.
The MVR Statistics page displays.
6. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 84. MVR statistics information
Definition
Field
The number of received IGMP queries.
IGMP Query Received
The number of received IGMP V1 reports.
IGMP Report V1 Received
The number of received IGMP V2 reports.
IGMP Report V2 Received
The number of received IGMP leaves.
IGMP Leave Received
The number of transmitted IGMP queries.
IGMP Query Transmitted
The number of transmitted IGMP V1 reports.
IGMP Report V1 Transmitted
Main User Manual
344
Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual