NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 515)

The System Information page displays.
5. Select Routing > OSPFv3 > Advanced > NSF OSPFv3 Summary.
The NSF OSPFv3 Summary page displays.
6. From the Support Mode menu, select how the switch performs a graceful restart:
• Always: OSPFv3 performs a graceful restart for all planned and unplanned warm
restart events.
• Disabled: OSPFv3 graceful restarts are disabled. This is the default selection.
• Planned: OSPFv3 performs a graceful restart only if a restart is planned (for
example, because a CLI command is executed).
7. In the Restart Interval field, enter the time that the switch waits after a graceful
restart before continuing OSPFv3 routing.
The range is from 0 to 1800 seconds. The default is 120 seconds.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Description Field
The restart status of the OSPFv3 helper support mode:
• Not Restarting
• Planned Restart
• Unplanned Restart
Restart Status
The time in seconds since the last restart occurred. Restart Age (seconds)
Displays how the OSPFv3 routing process on the switch last started:
• Not Attempted: A graceful restart was not attempted.
• Progress: A graceful restart is in progress.
• Completed: The previous graceful restart completed successfully.
• Timed Out: The previous graceful restart timed out.
• Topology Changed: The previous graceful restart terminated prematurely because
of a topology change.
Restart Exit Reason
Main User Manual 515 Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual