NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 743
When enabled, the DHCP snooping feature generates a log message when an invalid
packet is received and dropped by the interface.
10. In the Rate Limit (pps) field, specify the rate limit value for DHCP snooping purposes.
If the incoming rate of DHCP packets per second exceeds the configured burst
interval per second, the port shuts down. If the rate limit is None (which is the default),
the burst interval is also not applicable, and rate limiting is disabled.
11. In the Burst Interval (secs) field, specify the burst interval in seconds for rate limiting
on the interface.
If the rate limit is N/A, the burst interval is not applicable.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
Add a static DHCP binding and display or
clear dynamic DHCP bindings
You can add a static binding in the DHCP snooping bindings database and display or
clear the dynamic bindings in the bindings table.
To add a static DHCP binding and display or clear the dynamic bindings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > DHCP Snooping > Binding Configuration.
The Binding Configuration page displays.
6. From the Interface menu, select the interface.
7. In the MAC Address field, specify the MAC address for the binding to be added.
Main User Manual
743
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual