NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 648)

7. In the Priority field, specify the priority for the TACACS+ server.
The priority determines the order in which the TACACS+ servers are contacted when
attempting to authenticate a user. A value of 0 is the highest priority. The range is
from 0 to 65535.
8. In the Port field, specify the authentication port number for TACAS+ server sessions.
The value must be in the range from 0 to 65535.
9. In the Key String field, specify the authentication and encryption key for TACACS+
communications between the device and the TACACS+ server.
The key can be from 0 to 128 characters. The key must match the key used on the
TACACS+ server.
10. In the Connection Timeout field, specify the time that passes before the connection
between the device and the TACACS+ server times out.
The range is from 1 to 30 seconds.
11. Click the Add button.
The server is added to the switch.
12. To save the settings to the running configuration, click the Save icon.
Modify the settings for a TACACS+ server
on the switch
To modify the settings for a TACACS+ server on the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > TACACS+ > TACACS+ Server
Configuration.
Main User Manual 648 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual