NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 331)

10. In the Multicast Router Expiry Time field, specify the period for the multicast router
expiration time of MLD Snooping.
The range is from 0 to 3600 seconds. The default is 300 seconds.
11. From the Proxy Querier Mode menu, select to enable or disable the proxy querier
mode.
If you select Disable, the MLD proxy query with source IP 0::0 is not sent in response
to an MLD leave packet. The default value is Enable.
12. From the Exclude Mrouter Interface Mode menu, select to enable or disable the
mrouter interface mode.
This selection specifies the type of information that is forwarded to the upstream
multicast router interface.
If enabled, the interface blocks all unknown multicast data through the mrouter port,
whether the port is configured dynamically or statically. Only MLD PDUs are allowed
to pass through the mrouter port to the upstream router interface.
The default is Enable. If disabled, the interface forwards both unknown multicast
data and MLD PDUs to the upstream multicast router interface.
NOTE: For information about MLD Plus mode for VLANs, see Configure
MLD snooping for VLANs automatically with MLD Plus mode on page 328.
13. Either add the new VLAN or save the settings for the existing VLAN:
• Add the new VLAN: Click the Add button.
The VLAN is added.
• Save the settings for the existing VLAN: Click the Apply button.
Your settings are saved.
14. To save the settings to the running configuration, click the Save icon.
Remove the MLD snooping querier settings
for a VLAN
You can remove the MLD snooping querier settings for a VLAN.
To remove the MLD snooping querier settings for a VLAN:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
Main User Manual 331 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual