NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 653)

Configure an enable authentication list
An enable list specifies the authentication methods to validate privileged EXEC access
in the CLI. An enable list can apply to users that access the switch CLI through one of
the following methods:
• Secure Shell (SSH): For information about selecting an enable list for SSH access,
see SSH management access on page 669.
• Telnet: For information about selecting an enable list for Telnet access, see Telnet
management access on page 676.
• Console port: For information about selecting an enable list for console port access,
see Console port management access on page 679.
Two default lists are present: enableList and enableNetList. You cannot delete these
lists.
The preconfigured users (admin and guest) are assigned to the enableList until you
specifically select a different list.
All newly added users are also assigned to the enableList until you specifically select a
different list.
To configure an enable authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > Authentication List > Enable
Authentication List.
The Enable Authentication List page displays.
6. Do one of the following:
• Create a new list: In the List Name field, specify a name.
Main User Manual 653 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual