NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 538)

• Routing, IGMP, and multicast must be globally enabled on the switch.
• You must configure at least one routing interface.
• The IGMP proxy interface cannot be the same interface as an IGMP routing interface.
To configure an IGMP proxy interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > IGMP > Proxy Interface Configuration.
The Proxy Interface Configuration page displays.
6. From the Interface menu, select the interface that must function as the IGMP proxy
interface.
7. From the Admin Mode menu, select Enable or Disable to enable or disable the
IGMP proxy capability on the interface.
The default is Disable.
8. In the Unsolicited Report Interval field, specify the period in seconds between
repetitions of a host's initial report of membership in a group.
The range is from 1 to 260. The default is 1.
9. Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 129. IGMP proxy interface configuration information
Description Field
The IP address of the IGMP proxy interface. IP Address
The subnet mask for the IP address of the IGMP proxy interface. Subnet Mask
Main User Manual 538 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual