Routing information protocol – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 435
This number includes all static and dynamic ARP entries.The range is from 384 to
760. The default is 760.
10. Select the Dynamic Renew Enable or Disable radio button to enable or disable
dynamic ARP entries to attempt to be automatically renewed after aging out.
The default is Enable.
11. To remove certain entries from the ARP table, select one of the following options
from the Remove From Table menu:
•
All Dynamic Entries: All dynamic entries will be removed.
•
All Dynamic and Gateway Entries: All dynamic and gateway entries will be
removed.
•
Specific Dynamic/Gateway Entry: You must specify the IP address of the specific
dynamic entry or specific gateway entry in the Remove IP Address field.
•
Specific Static Entry: You must specify the IP address of the specific static entry
in the Remove IP Address field.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 113. ARP Table Configuration
Description
Field
The total number of entries in the ARP table
Total Entry Count
The highest value reached in the Total Entry Count field. This counter is
restarted when you change the size of the ARP table cache.
Peak Total Entries
The total number of active static entries in the ARP table
Active Static Entries
The total number of configured static entries in the ARP table
Configured Static Entries
The maximum number of static entries that can be defined
Maximum Static Entries
Routing Information Protocol
Routing Information Protocol (RIP) is a protocol that switches and routers can use to
exchange network topology information. RIP is characterized as an interior gateway
protocol, and is typically used in small to medium-sized networks. A device that runs
RIP sends the contents of its routing table to each of its adjacent devices. When a route
Main User Manual
435
Manage Routing
Fully Managed Switches M4350 Series Main User Manual